LED | Color | LED Status | Description | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
System Status | Red/Green | Flashes green and red alternately every 0.5 sec |
| ||||||||||
Red |
| ||||||||||||
Flashes red every 0.5 sec | The NAS is in degraded mode (one member hard drive fails in RAID 1, RAID 5 or RAID 6 configuration). | ||||||||||||
Flashes green every 0.5 sec |
| ||||||||||||
Flashes green every 2 sec | The NAS is in S3 Sleep Mode1. | ||||||||||||
Green | The NAS is ready. | ||||||||||||
Off | All the hard disk drives on the NAS are in standby mode. | ||||||||||||
Power1 | Green | Flashes green | The NAS is booting up. | ||||||||||
Green | The NAS is on and ready. | ||||||||||||
LAN | Orange | Orange | The disk data is being accessed from the network. | ||||||||||
Flashes orange | The NAS is connected to the network. | ||||||||||||
10 GbE* | Green | Green | The 10GbE network expansion card is installed. | ||||||||||
Off | No 10GbE network expansion card is installed. | ||||||||||||
HDD | Red/Green | Red | A hard drive read/write error occurs. | ||||||||||
Flashes green | The disk data is being accessed. | ||||||||||||
Green | The hard drive can be accessed. | ||||||||||||
USB | Blue | Flashes blue every 0.5 sec |
| ||||||||||
Blue | A front USB device is detected (after the device is mounted). | ||||||||||||
Off |
| ||||||||||||
eSATA** | Orange | Flashes | The eSATA device is being accessed. | ||||||||||
Off | No eSATA device can be detected. |
Beep sound | No. of Times Corelcad 2020 04. | Description | ||||
Short beep (0.5 sec) | 1 |
| ||||
Short beep (0.5 sec) | 3 | The NAS data cannot be copied to the external storage device from the front USB port. | ||||
Short beep (0.5 sec), long beep (1.5 sec) | 3, every 5 min | The system fan is out of function (TS-119 does not support smart fan). | ||||
Long beep (1.5 sec) | 2 |
| ||||
1 |
|
© 2015 QNAP Systems, Inc. All Rights Reserved. |
LED | Color | LED Status | Description | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
System Status | Red/Green | Flashes green and red alternately every 0.5 sec |
| ||||||||||
Red |
| ||||||||||||
Flashes red every 0.5 sec | The NAS is in degraded mode (one member hard drive fails in RAID 1, RAID 5 or RAID 6 configuration). | ||||||||||||
Flashes green every 0.5 sec |
| ||||||||||||
Flashes green every 2 sec | The NAS is in S3 Sleep Mode1. | ||||||||||||
Green | The NAS is ready. | ||||||||||||
Off | All the hard disk drives on the NAS are in standby mode. | ||||||||||||
Power1 | Green | Flashes green | The NAS is booting up. | ||||||||||
Green | The NAS is on and ready. | ||||||||||||
LAN | Orange | Orange | The disk data is being accessed from the network. | ||||||||||
Flashes orange | The NAS is connected to the network. | ||||||||||||
10 GbE* | Green | Green | The 10GbE network expansion card is installed. | ||||||||||
Off | No 10GbE network expansion card is installed. | ||||||||||||
HDD | Red/Green | Red | A hard drive read/write error occurs. | ||||||||||
Flashes green | The disk data is being accessed. | ||||||||||||
Green | The hard drive can be accessed. | ||||||||||||
USB | Blue | Flashes blue every 0.5 sec |
| ||||||||||
Blue | A front USB device is detected (after the device is mounted). | ||||||||||||
Off |
| ||||||||||||
eSATA** | Orange | Flashes | The eSATA device is being accessed. | ||||||||||
Off | No eSATA device can be detected. |
Beep sound | No. of Times | Description | ||||
Short beep (0.5 sec) | 1 |
| ||||
Short beep (0.5 sec) | 3 | The NAS data cannot be copied to the external storage device from the front USB port. | ||||
Short beep (0.5 sec), long beep (1.5 sec) | 3, every 5 min | The system fan is out of function (TS-119 does not support smart fan). | ||||
Long beep (1.5 sec) | 2 |
| ||||
1 |
|
© 2015 QNAP Systems, Inc. All Rights Reserved. |